Pill Blister Packaging DPP250 Performance:
Suitable for ampoule, vial, oral liquid and other small round bottle automatic printing, tray forming and feeding in tray.
Product specify:This machine is an improved product innovated by our company that incorporates pneumatic-photo-electro-mechanic, controlled by PLC and man-machine interface operation. It meets packing requirement of small round bottle as ampoule for automatic printing, tray forming, feeding and cutting. It is featured by compact construction and convenient operation.
Features:
1. Automatic production line of up and lower heating, positive press forming (tray forming), printing, automatic feeding (feed in tray) and cutting.
2. Equipment with mechanism checking device, eject empty or lack packing tray automatically. Blister forming, heat-sealing, lot number embossing, avulsion line impressing and cutting etc all adopt gear mandrel orientation, each can move freely in the mandrel when rotating the hand wheel, and the machine equipped with a staff gauge and tightening nuts for calibration and orientation.
3. It can line with labeling machine in front and cartooning machine in back part, carry out the whole automatic production line.
4. Main transmission part adopts parallel axis and bevel wheel speed reducer. Forming, heat-sealing and impressing moulds adopt bolt orientating which leads to precise orientation, easy to change mould and material saving.
Main Technical Parameters:
Model DPP-250
Cutting Frequency (times/min) 10-30
Max. forming area and depth (mm) 340×140×35
Travel Range (mm) 40-150
(Can be lengthened to 180mm as user's requirements) Air Pressure (Mpa) 0.4-0.6 Air Supply ≥0.35m3/min
Total Power 380V/220V 50Hz 7.5kw
Main Motor Power (kw) 1.5
PVC Sheet (mm) 0.25-0.5×350
PTP Aluminum Foil (mm) 0.02-0.035×350
Dialysis Paper (mm) 50-100g×350
Mould Cooling Tap Water Or Circulating Water
Overall Dimensions (mm) 3000*730*1600(L×W×H)
Weight (kg) 1600
